Making spare parts with 3D printing — from a photo to a finished part
We recreate unavailable, discontinued and broken plastic components — for industrial machinery, household appliances, cars, youngtimers and agricultural machinery. All we need is photos with dimensions, or the original part as a pattern.
In short
Drukujemy3D.pl recreates plastic parts that are unavailable or out of production using 3D printing – for industrial and agricultural machinery, home appliances, power tools and youngtimers. The model is built from photos and measurements or from a 3D scan, so the manufacturer’s technical documentation is not needed.
- What we recreate: gears, cogs, housings, handles, caps, bushings
- No documentation needed: clear photos with a ruler, or the broken part itself
- Materials chosen for the part’s working conditions: Nylon, PA-CF, ABS, ASA, PETG
- Run size: from 1 piece
- Quote: 24 hours from sending photos or a file
We recreate unavailable plastic parts with 3D printing
A broken part that is out of stock is one of the most common reasons a machine or appliance stands idle. 3D printing makes it possible to recreate such a component within a few days, with no minimum batch and no need for technical documentation.
Making spare parts with 3D printing works in three scenarios: you have the original component as a pattern, you have photos with accurate dimensions, or you only have a description and a memory of what the component looked like. We can help in all three — either by reproducing the geometry in CAD ourselves, or by printing from a model you supply. The result is a functional copy that puts the machine or appliance back to work.
We specialise in technical FDM materials — Nylon, ABS, ASA, PETG — which withstand the mechanical loads, temperatures and working conditions typical of industrial machinery, cars and agricultural equipment. We do not make decorative PLA prints — we make replacements that work.
Which parts do we replace with 3D printing?
We recreate plastic and polymer components wherever the manufacturer no longer sells a replacement, or the delivery time is simply unacceptable.
Industrial machinery
Gears, guides, bushings, brackets and covers for production lines, packaging machines and machine tools. We make components discontinued by the manufacturer or unavailable given how short the acceptable downtime is.
Youngtimers and classic cars
Plastic clips, mountings, dashboard components, trim frames and covers for cars the main dealer no longer makes spare parts for. We recreate them from the original or from photos with dimensions.
Household appliances
Knobs, blanking caps, handles, drawer runners and other small appliance components that service centres no longer stock. Often the only option for older, discontinued equipment.
Agricultural machinery
Components for combines, seed drills, sprayers and tractors — especially valuable when a breakdown happens mid-season and the dealer’s delivery takes weeks. We make them in ABS or Nylon from a pattern or a photo.
Tools and power tools
Housings, guides, covers and small mechanisms for power tools. Particularly useful for brands whose service network no longer offers parts for older models.
Building and installation components
Fittings, adapters, blanking plugs, elbows and other installation components in non-standard sizes or out of production — we print them to the required dimension in PETG or ABS.
From a photo to a finished part in 4 steps
You do not need a CAD model. Good photos with dimensions are enough — we take care of the rest.
Send photos or a file
Send photos of the damaged or pattern part with dimensions (measured with callipers). If you have a CAD model — even better. Describe what the component is made of and what it does.
Quote in 24h
We assess how complex the reproduction will be, choose the material and send back a binding quote. If anything is unclear, we will ask before quoting.
Modelling and printing
Where there is no model, we build the CAD geometry from the pattern or the photos. We print, check dimensions and fit, and remove the supports.
Courier shipping
We pack securely and ship by courier or InPost parcel locker — next business day delivery. VAT invoice sent electronically.
Technical materials for spare parts
We match the material to the working conditions of the part — temperature, loads, moisture, chemicals and UV. Not every component needs Nylon — sometimes PETG is perfectly sufficient, and cheaper.
Gears, bushings, guides, sliding components. High resistance to abrasion and dynamic loads — where PLA and ABS would not hold up.
A classic engineering material — impact strength and a good working temperature. For housings, mechanical components and parts exposed to knocks.
The properties of ABS, plus resistance to UV and weathering. Ideal for exterior components — bodywork, roof-mounted fittings, outdoor applications.
Strong, flexible, chemically resistant. A good starting point for most replacements in appliances, installations and components not exposed to extreme conditions.
A rubber-like elastomer — for seals, surrounds, damping pads and components that need to flex and compress without cracking.
Carbon-fibre nylon — maximum stiffness at minimum weight. For heavily loaded components where ordinary Nylon is too soft.
| Material | When to choose it | Typical spare parts |
|---|---|---|
| Nylon (PA12) | Dynamic loads and friction | Gears, bushings, guides, sliding elements |
| PA-CF | Maximum stiffness at low weight | Highly loaded parts where plain Nylon is too soft |
| ABS | Impact strength, service up to 85°C | Housings, mechanical parts, parts exposed to knocks |
| ASA | Outdoor conditions – UV and moisture | Bodywork, roof-mounted parts, outdoor applications |
| PETG | Universal starting point, chemical resistance | Appliance and plumbing replacements, parts without extreme conditions |
| TPU | Flexibility, compression without cracking | Gaskets, edge trims, damping pads |
How much does making a spare part cost?
The cost depends on the complexity of the geometry, the material and the number of pieces. Where there is no CAD model we add the cost of modelling — always stated in the quote. We invoice in PLN; euro amounts are indicative and converted at the current exchange rate.
A wheel, clip, blanking cap or knob
A housing, bracket or gear
5-100 identical pieces
Minimum order value: PLN 50 net (~€12). More about how we price 3D printing →
Frequently asked questions — making spare parts
Can a part be made without a CAD model?
Yes — that is our most common scenario. Clear photos from several angles and accurate dimensions measured with callipers are enough. You can also send us the original part as a physical pattern — we will scan or reproduce it and send it back to you together with the print.
How strong are 3D printed parts compared with the original?
That depends on the material of the original and on the application. Nylon (PA12) and ABS withstand loads close to injection-moulded technical polymers at low and medium loads. Where loads are very high, or the component is safety-critical, we always say so in the quote.
Do you make single pieces or do you require a batch?
We make them from a single piece — with no minimum order quantity (beyond the PLN 50 net value). Volume discounts apply from 5 pieces upwards, and the CAD modelling is paid for only once, however many copies you order.
Which material should I choose for an exterior part exposed to sunlight?
ASA — it resists UV and weathering, unlike ABS and PLA, which yellow and become brittle under sunlight. For components permanently submerged or exposed to moisture, PETG or Nylon performs better than ABS.
Do you make agricultural machinery parts during the season?
Yes — and we understand that a breakdown during harvest will not wait. For urgent jobs we offer an express mode with a 24-48h turnaround for a surcharge. Tick it in the quote form or call us directly on +48 888 570 971.
Do you sign an NDA on confidential projects?
Yes. On projects that require confidentiality — particularly for businesses — we sign an NDA before any technical documentation or physical patterns change hands. Mention it in your enquiry or use the contact form.
Who carries out the work at Drukujemy3D.pl?
Drukujemy3D.pl is a 3D printing service run by AP2Media Sp. z o.o., based at ul. Miodowa 5 in Czerwin, Masovian Voivodeship, Poland, working for companies and private customers across the country. It is run by Adam Piersa, who has worked in 3D printing for 7 years and handles every job personally – from the quote, through modelling and printing, to shipping. The equipment is 7 Bambu Lab printers (P1S and A1, 256×256×256 mm build volume) and a Creality CR-Scan Raptor scanner for reverse engineering. VAT ID (NIP) 7582396091, company register (KRS) 0001106484, REGON 528672529.