3D printing quote – we reply within 24h
Send us a 3D model or photos of the part — our engineer will check the file and send back a binding quote with the price, material and lead time. The quote is always free.
3D printing quote form
Fill in the form — we will come back with a binding quote within 24 business hours.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
What will we not print?
Two kinds of enquiry we either turn down or accept with a caveat. Better to know before you fill in the form than after.
Will you print something that comes into contact with food?
We do not take those jobs – that covers tableware, moulds, bar accessories and parts for food machinery. An FDM print is built layer by layer, and the micro-gaps between layers are almost impossible to clean out and encourage bacterial growth.
A filament described as food-safe does not change that. Compliance with Regulation (EC) No 1935/2004 is decided by the finished article together with its whole manufacturing process – not by the raw material it was made from.
My filament is certified to EN 71 – will the print be certified too?
We will print it, but certification stays on your side. A filament’s declaration of conformity with EN 71-3 (migration of certain elements) covers the material, not the finished article.
Printing creates a new product, and it is that product which has to meet the requirements – including EN 71-1 (mechanical and physical properties, among them small parts and sharp edges) and EN 71-2 (flammability). Those depend on the model geometry, the print settings and the finishing, so the raw material’s certificate does not carry over to the print. A toy placed on the EU market needs CE marking under Directive 2009/48/EC, and the party placing it on the market is responsible – usually you, not us.
Testing is done by accredited external laboratories. A list of them is published by the Polish Toy Association; it includes SGS Polska, TÜV Rheinland Polska, Intertek Poland, J.S. Hamilton Poland, UL International Polska and the Material and Environmental Engineering Laboratory of the KOMAG Institute. We work with none of them and do not broker testing – we list them as a starting point.
Example 3D printing quotes
The figures below are orders of magnitude for typical jobs. The final price depends on the model, material and technology — we will prepare an exact quote once we receive your file. We invoice in PLN; euro amounts are indicative and converted at the current exchange rate.
A single functional part
An enclosure or working model
A precise resin model
Minimum order value: PLN 50 net (~€12). For batches above 10 pieces — volume discount. Find out more about how we price prints →
What affects the cost of 3D printing?
Three main factors determine the final price — a good description of the application helps us pick the right parameters and bring the cost down.
Model volume and geometry
The more material a model uses, the higher the cost. Simple geometries print faster and more cheaply than complex spans that need a lot of support material.
Printing time
Machine time is directly proportional to the price. Express turnaround (24-48h) is available for a surcharge — just tick it in the form.
Material and technology
PLA is the cheapest starting point. Nylon, PA-CF and SLA resins cost more because of the raw material price and the complexity of post-processing.
Number of pieces
For batches above 10 pieces we apply volume discounts. A single order for more pieces usually gives a better unit rate than several separate orders.
Post-processing
SLA prints require washing and UV curing. With FDM we remove supports and optionally sand or paint — every stage is included in the price.
Delivery method
Standard delivery by courier or InPost parcel locker. The delivery cost is added to the order when the invoice is issued.
How does an order work?
From sending the file to a parcel at your door — the whole process is simple and handled remotely.
Fill in the form
Upload your 3D file, give the number of pieces and describe the application. If you do not know the material — tick “I don’t know”.
Quote in 24h
Our engineer checks the file for mesh errors and sends back a binding offer with the price, material and lead time.
Printing and inspection
Once you accept, we start production. Finished parts go through dimensional inspection and post-processing.
Courier shipping
We pack securely and ship by courier or to an InPost parcel locker. VAT invoice sent electronically.
Frequently asked questions
How long does a quote take and is there a charge?
The quote is always free. Once you send the file through the form, our engineer checks that the model is correct and sends a binding offer — normally within 24 business hours.
I don’t have a 3D model — what should I do?
Accurate photos and dimensions of the damaged or intended part are enough. We also offer reverse engineering and CAD modelling — describe your problem in the “Short description” field or get in touch through the contact form.
What is the lead time?
Normally 3-5 business days from acceptance of the quote. For urgent jobs we offer an express mode with shipping in 24-48h for a surcharge — mention it in the order description.
What is the minimum order value?
The minimum order value is PLN 50 net. We print from a single piece — no artificial quantity thresholds. For batches above 10 pieces we apply volume discounts.
Do you advise on material selection?
Yes. In the form, tick “I don’t know” in the material field and describe the application (e.g. “outdoor use”, “high temperatures”). Our engineer will pick the right material — ASA for UV, Nylon for friction, PETG for food contact.
Do you issue VAT invoices?
Yes. We issue the VAT invoice electronically and send it together with the shipping confirmation. Provide your company details or VAT ID when placing the order.
